kingroon KP3 UP GRADEVer2
thingiverse
base.stl wFan.stl (Wind specialization ver) gFan.stl (General purpose ver) toplong.stl (long ver) topshort.stl (short ver) 5015 24v To install a blower fan With 80 cm wiring to extend the wiring M3-10mm 6 pieces M3-20mm 4 pieces 2 M3 washers <preferably Is required If you screw it in normally, you can fix it by self-forging. At this time, do not screw in the screws excessively. The extended connector of 5015 is in the 5th photo Please insert it into the connector with FAN at the tip of the tweezers. * The positive wiring of the blower fan is on the right when viewed from the Y-axis motor side. It seems that the polarity of the wiring may be reversed depending on the blower fan. The Y-shaped jig (jig.stl) is as shown in the 6th photo. After moving the hot end to the center Put it under the work fan nozzle A jig used to adjust the height by tightening the left and right screws. LED.stl is used when attaching parts to the fan guard If you don't want to add anything, please use fan_holder40x40.stl or your favorite data.
With this file you will be able to print kingroon KP3 UP GRADEVer2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on kingroon KP3 UP GRADEVer2.