KiNG Odin-5 F3 Shroud Stock Hardware

thingiverse

Quieter than my old Odin-Be-Quiet package and finally my own ducting/shroud. Edited the duct to make it more easily printable. No supports needed for any of the parts printed on a stock Odin. I also added a version with a flat mounting point for the 4010 part cooling fan for models with the flat mounting point instead of the tabs (Duct no fan tabs.stl). This is also helpful for people who replaced their fans and they don't have recessed tabs like most Odins do. BLTouch offset: x=0, y=-30, z=-2.5 REMOVE THE METAL PLATE THE PART COOLING FAN USED TO MOUNT TO! Needs: 2x m3x16mm screws for the hotend fan (8mm longer than stock) OR! 2x m3x20mm screws for hotend fan+metal grill 2x m3x8mm screws for wire bracket 4x m3x6mm screws for wire tie-down and ABL 2x m3x4mm screws to for ABL mount (reuse the right 2 stock shroud screws) The last 3 pieces are for the control box fans (back shroud, back duct, and motherboard duct) In the photo of the control box, the arrows correspond to which way the fans should blow. 2x m3x25mm screws for back ducting and spacer. Make sure this fan is oriented as an exhaust 2x m3x10mm screws for the motherboard fan and the fan needs to be turned around to suck air away from it and blow toward the rear exhaust. If you find my parts helpful, please consider donating to continue my research and progress in my projects. Paypal: Mike.king.2590@Gmail.com Venmo: @Maikumizu Cashapp: $Maikumizu https://www.patreon.com/KiNG3D