Killdozer Treads Fix

prusaprinters

<p>This is a simple fix for the track/treads of the excellent Killdozer remix by MakerKJS (www.thingiverse.com/thing:4851061)</p><p>I wanted to print a mini Killdozer, and when I scaled the model down to 50% a thin area of the treads turned into a gap in PrusaSlicer. This fix just gets rid of that thin slice of track.</p><p>I would probably recommend you not scale it down to 50% like I did, because some pieces become very thin, and this model requires a ton of supports making post-processing a delicate process. I had to glue a couple pieces back together. Overall, I enjoy how it turned out, although it looks a bit sloppy because scaling it down this much caused some layer artifacts.</p><p>I used a couple sample spools from the Paramount3D sampler pack. Egg Yolk Yellow for the Killdozer body, Black for the tracks, and Battleship Gray for the armor plating. Makes a great conversation piece, if the conversation is to be about how you might be a sociopath...</p><h3>Print Settings</h3><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>200</p><p><strong>Infill: </strong>20</p><p><strong>Filament: </strong>Paramount3D PLA </p>