Kick Drum SD/Micro SD Card Holder

prusaprinters

<p>This SD cardholder was inspired by the drummer of my band who recently began pursuing professional photography. &nbsp;Features include:</p><ul><li>Threaded top and bottom lids</li><li>6 SD Card Slots</li><li>12 Micro SD Card Slots</li><li>"Secret" compartment for storage (approx 3 cubic inches of storage)</li></ul><p>This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at <a href="https://www.patreon.com/thinair3D">https://www.patreon.com/thinair3D</a></p><p><strong>Printing Info:</strong></p><ul><li>The two lids were designed to have the open side facing the build plate (only way to get the details on the top :/ ), so you will need supports on both sides.&nbsp; I would highly suggest tree supports, I haven’t had any issues removing mine.&nbsp;&nbsp;</li><li>For the main body, print with the sd card sides facing up.&nbsp; You shouldn’t need any supports for the secret storage area, although they may be helpful if your bridging isn’t great.&nbsp;</li><li><strong>Infill:</strong> You should be fine with standard 10-15% infill max and it will be plenty strong.&nbsp;&nbsp;</li><li><strong>Layer Height:</strong> I have only tested this model with a 0.2 layer height and am unsure of how the threads would print with a higher layer height, so attempt at your own risk!</li></ul>