Keyhole/Nail Hanger Inserts Glue and Screw Mounted

thingiverse

I designed these inserts as the Iceland clock fell off the wall! I was looking for a keyhole hanger that was shallow, no more than 20mm diameter and preferably glued in place. And although I found plenty of Keyhole hangers they were all too deep or the diameter was too large. So I started by designing the 20mm glued version and I have used this one for the clock. It requires a 3.5mm screw in the wall to hang it on. I have expanded the range by adding screws to the 20mm version, creating a 25mm dia screw version and after a request from a friend a insert that will hang on a picture nail which is only 15mm dia and there are two versions of this glue and screw. They all require a 6mm deep flat bottom hole 15/20 or 25mm dia depending on the version The 15 and 20mm dia screw versions require 2.5mm (No3) screws and the 25mm dia 3.5mm screws. The screw to hang the object on is 3.5mm for all versions. They should only be used for light duty objects, i.e. clocks, pictures etc. <b>I cannot take any responsibility for things falling off walls!!</b> 6 Versions <b>Keyhole</b> 15mm dia Glue 20mm dia Glue 20mm dia Screw 25mm dia Screw <b>Nail</b> 15mm dia Glue 15mm dia Screw