Key Carer

pinshape

This appears to be a DIY guide for assembling a key holder with a case and multiple keys. The steps are: 1. Place the grip of the key into the Key Holder and wiggle it into place. 2. Place the Key holder into the key case with the dot pointing in the direction of the groove. 3. Place one end of the nut through the top or bottom of the key case, and through all three key holders. 4. Press down firmly on the pin inside the nut to lock the keys into place. 5. Open the door. The guide also includes some printing settings for a 3D printer: * Layer height: 1.5mm * Print speed: 50-60mm/s * Travel speed: 120mm/s * Wall thickness: 0.7mm * Top/bottom layer thickness: 0.75mm * Infill percentage: 18-20% * Retraction enabled * Cooling enabled * Support enabled everywhere, with a 0.3mm Z distance. These settings are likely specific to the printer being used and may need to be adjusted for other printers.