Kaufland glue gun stand with glue stick compartment

prusaprinters

<p>This is a <strong>2-part glue gun stand</strong>. I designed it to hold the <em>FMGG6996</em> (TY-G6006) 80W glue gun, which I bought in <strong>Kaufland</strong>, but I think <strong>Lidl</strong> had the similar sized ones. The gun's front part, which goes in the stand is 30x46 mm, and the stand is 35x50 mm inside.</p> <p>There are 2 parts, which can be used separately:</p> <ul> <li>Stand, which holds the gun</li> <li>Box, which has a space for 11 mm glue sticks</li> </ul> <p>Both are assembled with 4 M3x10 screws. Holes in the box are 2,5 mm in diameter, so the screws should thread directly into them without issues, but you might run a 2,5 mm drill through to clean them.</p> <p>If you want, you can use the stand without the box and screw/glue it whenever you want.</p> <p><strong>The parts were designed to print without supports</strong></p> <p><strong>The pictures show the first design, which has been slightly improved - the box is taller, so it can hold 2 stacks of sticks and the stand is a little beefier now.</strong></p> <p>STEP files are included - feel free to adapt the parts to your needs if you'd like to.</p> <h3>Print instructions</h3><p><strong>Printer Brand:</strong> Prusa<br/> <strong>Printer:</strong> i3 MK3<br/> <strong>Rafts:</strong> No<br/> <strong>Supports:</strong> No<br/> <strong>Resolution:</strong> 0,1-0,5<br/> <strong>Filament:</strong> Prusament PETG Neon Green<br/> <strong>Notes:</strong></p> <p>I've printed this with Prusament Neon Green PETG with 0.6 mm nozzle and 0.5 mm layer height.</p>