Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud
thingiverse
Kassnar / ARMSCOR / SpringBingham I built this barrel shroud for my Kassnar M16, covering it from the end of the stock to the flash hider. I printed it with no supports and it turned out fine, but I recommend using them since some printers handle prints differently. My printer is well-calibrated, so the hole measurements are 16mm at the stock end and 13mm at the barrel end - you may need to adjust the hole size based on your own printer's calibration. The top rings have holes for set screws if needed. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: No Supports: Yes Resolution: At least 0.2 Infill: 10-20% for a good bite on the set screws
With this file you will be able to print Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud.