Kamstrup IR eye

thingiverse

A Modified Case for the IR Eye.\n1) Magnets are inserted during printing .\n2) A hole is drilled at the top for a plug.\nPrint Settings\nPrinter Brand: \n Replicator MakerBot\n \n Printer Model: \n MakerBot 2X Replicator\n \n Rafts: \n Disabled\n \n Supports: \n Disabled\n \n Resolution: \n 0.2 mm\n \n Infill Percentage: \n 20%\n \n Notes: \n When the print reaches about 50% completion, pause the printer and insert the magnets in place.\nYou can add the gcode command M71 to the gcode file to pause the print at the correct time. The zip file included contains a modified Replicator 2X model with this command added.\nHere are the steps:\nExport your print from Maker Desktop as a gcode file.\nEdit the gcode file\nSearch for the slice that begins after 8mm (Z8.200). If you print in 0.2mm per slice, it will be slice 40.\nBefore the slice begins insert this:;Move printer to waiting position and pause\nG1 X-112 Y-73 Z150 F3300.0 (move to waiting position)\nM71\nSave the file\n\nConvert to x3g \nUse the tool here: http://www.thingiverse.com/thing:81425\nI used this command:gpx.exe -g -m r2x kamstrup-bottom.gcode\n\n\nPost-Printing\n\nVoltage reading p1 230.0 V\nVoltage reading p2 229.0 V\nVoltage reading p3 230.0 V\nCurrent reading p1 0.39 A\nCurrent reading p2 0.51 A\nCurrent reading p3 0.25 A\nPower reading p1 0.056 kW\nPower reading p2 0.074 kW\nPower reading p3 0.028 kW\nEnergy consumption in 4223.0 kWh\nEnergy output 0.0 kWh\nEnergy consumption hi-res 4223.8312 kWh\nEnergy output hi-res 0.0012 kWh