Kai's Jade Swords -- from Kung fu Panda 3

prusaprinters

<p>When I saw Kung fu Panda 3, I really wanted Kai's Swords. Now that I have the ability to design it, I decided to give it a shot and I think it came out pretty well.</p> <p>I have included TopBlade and BottomBlade for those whose printers can't print the blade in one go. If your printer is 200mm high then just print the Blade.stl.</p> <p>If you think this is cool then check out my other designs. Thanks!</p> <h3>Print instructions</h3><h3>Category: Props Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2DxjZlB">i3 MK2S</a></p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 10%</p> <p><strong>Notes:</strong></p> <p>All the pieces are designed to be printed seperate and then glued together except the chain.</p> <p>For the chain you have to slip the ring.stl over the chain.stl halfway into the print so that the chain is permenantly attached to the sword. With this technique you can make the chain as long as you want. I printed mine about three and a half feet long. I also used a raft for the chain for better adhesion.</p>