K8-B CG1500 Mounting Plate

thingiverse

This is a mounting plate for the Kulp Lights K8-B with hole spacing in the plate, designed to mount into a CableGuard CG1500 enclosure. There are 4 variations of the file depending on what you need: - Internal_Holes: Mounting holes are underneath K8-B and plate must be mounted before mounting K8-B to the plate. This allows for tighter mounting of items in the enclosure. - External_Holes: Mounting holes are extended from the plate, allowing you to access all of the screws with the K8-B mounted to the plate. *Note: It is not difficult to just drill your own holes in either variation of the plate, the CG1500 has an easy spacing of 1" between the holes on the main grid* - Threaded_Inserts: The raised holes for attaching to the K8-B have a diameter of 4.2mm allowing for brass threaded inserts for M3 screws to easily be melted in place. - No_Threaded_Inserts: The raised holes for attaching the K8-B have a diameter of 2.75 to allow for a standard m3 machine screw (or similar) to be screwed straight into the plastic. *Note: It is not difficult to widen these holes with a drill if needed, some 3d printers may not all produce the holes the same size. the Kulp controller has holes with a diameter of 3.2 mm* Needed Items: - 4x m3 machine screws with length ~7mm in length - OPTIONAL: 4x m3 threaded brass inserts ~4mm in length - ~4x short small wood screws for screwing into the CG1500 through the plate's 3.5mm mounting holes. You may also like my standoffs for the K8-B OLED Screen: https://www.thingiverse.com/thing:4971913 As well as my MeanWell power supply mount for the CG1500: https://www.thingiverse.com/thing:4972045