
K1 Max LIT Raiser. All in One Led Raiser and Fixation
thingiverse
Thanks to Tony F and michel jubault for the Inspiration and the basedata.For a detailed Guide with photos look here:https://www.printables.com/de/model/723834-k1-max-lit-raiser-all-in-one-glass-lid-raiser-withInstallation Quickguide:Print 4 Sidebar (with or without Vents how you like)Print the same amount of Vent SlidesPrint 3x Corner SpacerPrint 4x CornersConnect all Corners to the SidesSolder a wire with the JST Connector to the LED Strip Put the Lid Raiser on Top of the Printer Insert the Heatinserts into the CornerSpacers and screw the LidRaiser downPlug in the new LED to the cable of the stock LEDLIGHT IT UP AND ENJOYDETAILS:MECHANICAL & INSTALLATIONThe Frame goes onto the Top like the normal NorcoT Frame.You can fasten it down to secure it with the CornerSpacer and the M3 Heatinsert.You just need a M3x35No need for Firmwarechanges, or sth else, will be controllable via the normal Screen.The LED needs to be soldered with a JST 2pin 1.25mm to connect to the printer instead of the little stock LED-Strip.LED STRIP & ELECTRICSThe LED strip slides in easily and dosn't need any glue or something else to stay in the groove.(The cabletie was just a momentary solution while testing, you can just shorten the cable down)SOLDERINGThe soldering is very simpel. You look for the cable that is connected to the original LED:This way you know what side of the cable is the (+) Positive. ( You can also mark it if you like)In my case i would need to put the black cable on the Positive of the LED (counterintuitiv)(This is just a picture to show the polarity in this case, it could be that your printer has it the other way round, and u should take a longer cable for the connector)Then you can plug it in and test it.DISCLAIMER: If you got it the wrong way, it won't fry your printer, the LEDs just won't work. So if it doesn't light up, just switch the wire-soldering.STILL THIS IS YOUR OWN RISK !!! it works on my printer fine, but i won't give any liability !Links and things to buy: LED Strip: Amazon what i have (Warmwhite)https://www.amazon.de/dp/B0CL9SXN4X?psc=1&ref=ppx_yo2ov_dt_b_product_detailsJST:Set of cables Male and Femalehttps://www.amazon.de/dp/B06WGM9W7S?psc=1&ref=ppx_yo2ov_dt_b_product_details Heatinserts M3:https://www.amazon.de/gp/product/B0CLLMD958/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1UPDATES:17.01.24 Needed to remove the fasteners i am not happy with the result. they need a slight change18.01.24 Uploaded the Corner_Spacer just need a M3 Heatinsert and updated the Vent Slides. i forgot to cut them out for the GlassLids22.01.24 FINSHED PROJECT:-updated the Description-added the neccessary pictures-wrote a guide for the soldering(Step files need 1 more week)For a detailed Guide with photos look here:https://www.printables.com/de/model/723834-k1-max-lit-raiser-all-in-one-glass-lid-raiser-withWaiting for your makes, comments and questions.
With this file you will be able to print K1 Max LIT Raiser. All in One Led Raiser and Fixation with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on K1 Max LIT Raiser. All in One Led Raiser and Fixation.