Just another Raspberry pi zero housing

prusaprinters

<p>Just another Raspberry pi zero housing with waveshare usb hat, that i needed and did not found any. so there you have it now if you need it.&nbsp;</p><p>The case has some holes for usb and gpio, should be printed in default irientation with 0.2mm layer height and 0.45mm extrusion width atl least 4 perimeters, i have printed mine with no top and bottom, only the infill is there as an mesh for better cooling, there is top and bottom part, i am using M3 screws, so i driller my rpi to match that screws, i will be making version for M2,5 as the rpi originaly has.&nbsp;</p><p>The rest of screws are M3x30 with countersunk head, and M3x6mm for mounting the pie to the bottom in the two holes closer to the back, than you will need 4pcs M3x8mm screws to mount the housing to the extrusion. There are two standoffs needed, they are 11mm tall and are meant between the pie and the hat, screws are going through them to the bottom in front.<br>&nbsp;</p><p>The housing is suitable for 2020 or 2040 profiles T or V shape.</p><p>usb hat used - https://www.aliexpress.com/item/4000012469482.html?spm=a2g0o.order_list.0.0.48971802sw2dwg</p>