junkboat for 3d printing 3D print model

cgtrader

You'll get everything you need to print the model on your own 3D printer. Just note that no physical model is included with your order. The parts that come in this pack are detailed below: backsail_fix.stl junk_back_fix.stl junk_deck_fix.stl firstsail_fix.stl mainsail_fix.stl (there are 3 different sizes) three_x_pole_moust_fix.stl To print out these parts, your printbed will need to be at least 15 x 15 cm and stand about 15 cm tall. They've scaled these files specifically for use with 28mm miniatures, which works out to roughly a scale of 1/48. If you'd rather work with another scale size, no worries! You can just adjust the size factor as needed. For instance: * for a print scale of about 10 mm miniatures, they recommend using around 40 - 45 % of this scaled size * at a 15mm miniature print size, go for 65% (about the size of a typical H0 Railroad model) * or if you're working with models sized 20mm, that'd translate to a print scale factor of 75 - 80% * for those working on prints exactly at 28mm, this one comes in handy since they recommend it as about 100% of the railroad standard (think: what would happen at 0 Railroad!) Don't get in touch unless you want printed copies sent to your mailbox; that's not what we provide here! Just know, though: the files you receive for this set can only be used privately and should not get mixed up with anything going public or turned into cash without an arrangement.