Jumper T-Pro AG01 3D Printed Mounts

thingiverse

Jumper T-Pro remix mounts to install the Radiomaster AG01 Mini CNC gimbals. This remix is specifically to be printed in PLA or PLA plus or other FDM material. Ideally printed at 0.08mm; or as low as possible with 99% infil for strength. Each gimbal mount has been modified to allow self tapping holes for simple installation. This means you don't need inserts. Also, the split between cut between each gimbal is to allow for the best possible look and ease of print. Each gimbal print is split into two parts Top and bottom cut. Throttle and Pitch gimbals are orientation specific within the Jumper T-Pro. Also there are two jigs called "fitter" which will help you glue the two halves of the gimble together with superglue. There also is a "shim" meant to be used in the top right corner of the throttle gimbal (when viewed from behind with the controller gimbal. This will help add pressure make sure the gimbal remains flush at the front. For instructions on how to assemble, and set everything up you can read this here: https://becky9.uk/wp/jumper-t-pro-ag01-mini-gimbal-fpv/ Warning: Wiring of the gimbals is VERY specific. Look at the screenshot and proceed carefully or you will destroy the sensors on the gimbals. See the last picture.