JST-SM 1x6 Skirt Connector (ADXL)
prusaprinters
I wanted a 6-pin JST-SM version of the 4-pin version so I modified the original to fit my adxl345.Recommended print settings:Material: ABS.layer height recommended: 0.2mm.Extrusion width recommended: Forced 0.4mm.Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.Infill percentage recommended: 40%.Wall count recommended: 4.Solid top/bottom layers recommended: 5.Printable without support Disclaimer:This is originally based on https://www.printables.com/model/399596-jst_sm-1x4-skirt-connector-adxlwhich is originally based on this mod for a Microfit 2x3 connector.which has been modified on this mod, to not need supports and to fit a bit tighter on the connector.I replaced the Microfit 2x3 connector for a JST_SM connector and made the design of this mod fit the jst connector.
With this file you will be able to print JST-SM 1x6 Skirt Connector (ADXL) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on JST-SM 1x6 Skirt Connector (ADXL).