Joystick

cults3d

This is a joystick concept I've been tinkering with for some time now. It's based on three potentiometers and an Arduino Nano that I've put to the test, and it works beautifully so far. I've also added rubber bands to force the stick to its center position in the pictures - they're held in place by a strong adhesive. Yes, it may not be the most delicate solution, but it gets the job done. You'll also need: * Four Bearing 624ZZ components with a diameter of 13mm, a thickness of 5mm, and a hole size of 4mm * One Bearing 635 component with a diameter of 19mm, a thickness of 6mm, and a hole size of 5mm * Six M4x20mm screws and six nuts * Four M3x20mm screws and four nuts * Two M3x10mm screws and two nuts * Three potentiometers (B1 P160KN3K), which I happened to have on hand in a 50K Ohm variant - see the print screen for dimensions This joystick was printed using PET-G material at a resolution of 0.2mm.