JLF Octagate v2 - 8-way Restrictor Plate for Sanwa JLF Joysticks

thingiverse

Broke a spring on my restrictor plate when installing an octagon gate, and had to print a new one for my JLF. Tried [S_R_Design's model](https://www.thingiverse.com/thing:3015174) and it worked, but I found it was slightly loose after install. Then I found [CyberDNIWE's model](https://www.thingiverse.com/thing:4893045), with its tightened fittings, and modified it to use the same octagonal gate shape as S_R_Design's, because my stick has a stock actuator. The tightened fittings on the guiding poles/holes were great and eliminated all wobble after install, but the allowances around the clips were far too low for my stick: I had trouble fitting it on, and it did not snap on without a significant amount of sanding. This model combines the gate shape and clip fitting size of S_R_Design's with the tightened guide poles/holes of CyberDNIWE's to create an octagonal-gated restrictor plate that snaps on easily and firmly off the printer.