JJP Pirates of the Caribbean Barrel RUM XXX RIGHT Flasher cover

thingiverse

### Jersey Jack Pirates of the Caribbean Pinball RUM XXX Barrel RIGHT Flasher Dome Cover This mod is intended for the LEFT flasher. [Go Here for the RIGHT Flasher](https://www.thingiverse.com/thing:4245647) This is a mod for your Jersey Jack Pirates of the Caribbean Pinball machine. The two flasher domes that light up when you need to collect gold needed some piratey theming. The RUM barrel to the rescue. This mod simply slides over the existing flasher domes in a totally non-destructive and easily removable manner. **The barrel is two-sided, allowing you to choose whether you want the XXX or the RUM Lettering showing depending on installation orientation.** It is printed in 2 pieces, the barrel, and the top. Just use some super glue to attach the top to the barrel. The barrel has supports modeled in for the font as creating supports in a slicer after the fact was not working out. You can either leave the supports in if you like the stencil look for the font or can be easily snipped off with wire snippers. If you do not want to paint the model, you can use any dark brown filament and it will come out pretty good. [Dark Brown Filament Amazon](https://www.amazon.com/TIANSE-Printer-Filament-Dimensional-Accuracy/dp/B06Y5M352Z/ref=sr_1_4?crid=13J4K1WBO38AU&keywords=brown+pla+filament&qid=1582843871&sprefix=brown+pla+fil%2Caps%2C210&sr=8-4) ## Instructions: 1. After printing, you may have some stringing on the text. I recommend using a heat gun on a low setting or a hairdryer to clean up the stringing. 2. Using snippers - this is optional - carefully snip off the supports. Use a hobby knife to clean any remaining material. **Be very careful with the R, the counter support in the R is very thin and easy to break** 3. The bands can be painted any color. I used Testors Model Paint Black Gloss. 4. Slide the barrel over the flasher dome; they fit snugly, but be careful not to put too much pressure on the sides with the text. Enjoy!!