JJ's Dice Box + Dice Stand (print-in-place)
prusaprinters
<p>A small and simple dice holder for a set of 7 standard size dice. Can also be used as a dice stand when playing. </p><p>Completely print-in-place. While the latch's tolerances are pretty tight, but it works well. The main hinge is kinda loose, it's as tight as my printer allowed pretty much. However there's not much play in the hinge, and (at least on my print) it's got an additional feature where, thanks to the bridges sagging, it snaps into its fully open position (feature, not a bug :p).</p><p>The outside design requires some good bed adhesion. I recommend setting the bridge angle to 30-45 degrees. Leaving it at 0 will make the bottom sag way too much. </p><p>My print was printed on an Ender 3 V2 with a 0.4mm nozzle, with Aurapol's PLA in Yellow L-EGO colour.</p>
With this file you will be able to print JJ's Dice Box + Dice Stand (print-in-place) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on JJ's Dice Box + Dice Stand (print-in-place).