Jewelry tree

prusaprinters

<p>Simplified jewelry tree holder.</p><h3>Print instructions</h3><p>Version <i>edited</i> means that stl files have been changed for Prusa MK3/S/S+. All you have to do is download and slice them. Version <i>100</i> means the stl files are unedited but they are larger than Prusa MK3/S/S+ print area. You can still use them and change their size on your own or use them for bigger printers.</p><p>Both stl's print from some nice looking filament. It really doesn't matter which type of filament you use on this model, but parts are glued together so it will be better to use the same type of filament for both parts.</p><p><strong>Completing</strong><br>Printed parts connect with super glue or some epoxy. If you want it to be more stable and solid, put a screw through hole in the base and screw it in the tree trunk. After completing there shouldn't be any gap between tree and tray. For easy connection use sandpaper and slightly sand wedge on bottom of the tree.</p>