Fișiere pentru imprimante 3D | Fișier 3MF | Lenovo TB311FU Wall Mount remix

Boost MeIf you like my work consider boosting!BoostThis is a remix of the original model by @RenatoKulman. I made this by request to fit a Lenovo M10 TB311FU model tablet. The main idea was to have a slim small formfactor usb-c cable that hides in the wall mount. I have added the used cable photo if you need to reverse image search for it. Purchased from Aliexpress link below.Prints in two parts. The wall mount itself and a small insert. The usb-c cable is placed in the slot from the back and the insert is then placed afterwards to prevent the cable from falling out. You can also use a tiny spot of super glue or double sided tape to stick the usb-c connector itself to the wall of the wall mount to have it stable , but from testing it was sitting stable once mounted on the wall. The cable is then bent around the insert and you then connect it to whatever extension , charger ,etc. cable for charging. You have 4 mounting holes for screws, we used some regular drywall screws so they screw in and sit flush with the mount to allow smooth sliding of the tablet. Once mounted the cable should be in position that it connects and charges the tablet same as it will disconnect when the tablet is pulled out.Overall easy to use and the ability to add/remove the tablet if needed and great for home automation to have a tablet as a control panel.https://www.aliexpress.com/item/1005007440270478.html