Jet Engine Component (5-1); Fan, Metal Blade with Snubber

cults3d

I used to design replicas of "Wide cord composite fans" for comparison with propellers. https://cults3d.com/en/3d-model/tool/jet-engine-component-5-fan This model is the Metal Fan Blade model with Snubber (Midspan shroud) that was widely popular before the emergence of "Composite fans". Some large engines with a bypass ratio of 5:1 feature this type, but it's primarily used in engines with a bypass ratio of approximately 1:1. This type was mainly constructed from titanium. At this time, several explainable elements were incorporated. ① Fan Blade, Metal Blade with Snubber (Midspan Shroud) Full Metal (Titanium) for Low Bypass Turbofan "All (3) Blades" can be removed and assembled simultaneously by hand. ② Fan Disk (Partial) having "Dovetail" type slots. Download files include; -files: STL Files= 2 items STL file name: "ws" of last 2 digits means "With Support" which is specially designed. Purchase Parts Information; -None Assembly Points - No special skill required. - All blades should be assembled simultaneously. Total Net Print Time:Approx. 6 HR - (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When actually printing, each parameter may be adjusted according to your experience. 3D printing settings Raft, Layer Height, Infill: Depending on your experience. My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA. I hope you have fun making!!