Jet Boat - Adjustable Battery Mount

thingiverse

I designed this to securely hold my battery in coppertop_01's jet boat design. The battery holder is made for my exact battery. ________________________________ Zeee 6S Lipo Battery 22.2V 100C 5200mAh Soft Case Battery with EC5 Connector for RC Car Truck Airplane Helicopter Quadcopter Boat Dimensions】- Zeee 5200mAh 6S lipo dimension is: 153*47.5*48.5mm/6.02*1.87*1.91inch(L*W*H); Approx Weight: 753g/26.56oz. ________________________________ It should fit a longer or shorter battery no problem as the length is adjustable. You can always add foam to it as well to accomodate a smaller battery. The battery holder uses M4x5x6 brass inserts unlike the M3x5x5 inserts the rest of the boat uses. The inserts seat a bit proud on the underside of the battery holder so you will have to drill out a couple MM of the hull center support to accomodate it. You can use the holder as a guide to do that. It will make sense once it is printed. I did it this way to make the battery sit as low as possible in the hull to lower the centre of gravity.