Jason Voorhees Tomb Stone LED Desk Toy

cults3d

Design based on Jason's tombstone from Friday The 13th Part 6: Jason Lives. Requires some assembly and electronics (if you want it to light up). I will create a video of assembly/finsihing once I get a moment, but its really quite simple. I used a combination of FDM (Ender 3 Pro) and MSLA (Mars 2 pro) printers for this model. Print the Stone with a large nozzle (0.6mm upward for extra texture) Base printed in wood filament then painted. Name plaque was printed on the Mars 2 Pro in translucent green resin, although im sure you could print it on an FDM with some transparent filament if you print slow. Extras required: 5V led strip https://amzn.to/3DKhd9b Micro USB board https://amzn.to/36SHLcw Pre mixed Poly filler (or filler of your choice) Print all parts. Fit the leds onto the back wall of the tombstone (pre wire so the tails hang out of the bottom). Now position the name plaque in the hole (may require some sanding depnding on your printer tolerances). Fill over the top with filler, then give it 24 hours to set. Sand back the filler to reveal just the lettering on the plaque. Fit the usb board into the base, and wire your leds. Use an adhesive to secure the stone to the base. If you plan on painting, prime the stone and paint/age/weather to your taste) Paint the hand and weather it by dry brushing with brown paint. Now fill the base up with filler to resemble fresh dirt. Insert the hand and position before the filler sets. Enjoy Designed. printed, assembled and finished by me :) Looking forward to seeing some of your makes. Think it will look really cool if you print the name plaque in transparent red resin. Please do not share or redistribute the files. Unless stated, my designs are for personal use only. If you would like to print any of my designs to sell commercially, please email me at tcrskipton@gmail.com to chat. Thank you <3