Japanese style lamp

thingiverse

Lamp Inspired by traditional paper lanterns found in eastern Asian culture, this lamp design brings a touch of elegance to any room. In the past, paper or thin material lanterns were popular in Japan, China, and Korea before the introduction of petrol lamps and light bulbs. They added warmth and ambiance to homes without the need for electricity. To print out the necessary parts, you will need: * A lampshade with a dimensions of 100x100x140mm, printed with 100% infill and a layer thickness of approximately 0.2mm. * A lampshade socket with dimensions of 100x100x20mm, requiring support structure and 100% infill, with a layer thickness of around 0.1mm. * A lamp base with dimensions of 100x100x40mm, also requiring support structure, with 15% infill and a layer thickness of approximately 0.1mm. * Optional: four base heels with dimensions of 12x12x9mm, printed with no support structure and 15% infill, with a layer thickness of around 0.4mm. To assemble the lamp aside from printing, you will need: * An E14 socket with an outer diameter of approximately 26.5mm. * An E14 lamp with a height of about 8cm (maximum 12cm). * A cable with a light switch. Important Safety Notice: When using this lamp, please be aware that high-temperature lightbulbs may cause the print to melt. Additionally, remember that print filament is flammable and should not be exposed to open flames. We recommend using a maximum of 15W for optimal safety. Assembly Tips: If the parts do not fit together correctly, please sand the edges to ensure a smooth fit. This design uses approximately 200 grams of grey/aluminium filament. The assembled dimensions are 100x100x164mm (x,y,z). Fusion 360 was used to create this design.