J RINGS N4014 3D print model

cgtrader

Diameter: 17.0 mm Thickness: - Edge 1: 64 - 1.3 mm (1/32 in.) - Edge 2: 70 - 1.8 mm - Bezel: 78 - 1.6 mm (5/16 in.) - Pave edges and interior of setting, as follows: • Outer rim (pavé beads): 85-87 - 1.4 - 1.0 mm (.055 - .040) Metal: Gold Setting Style: Classic round four-prong setting. Number of prongs on ring (4), Prong Size: Inner 1: Gold 14k - Inner Diameter: 8-9.0mm - Tip diameter : 6 - 2.2 mm Inner 2: 14K-Gold-Outer-Diameter=7.80-9.00-5mm Ring details: Finger rim edge on inside with a rounded profile. Number of diamonds and diamond weight to be advised upon request. Metal type will need confirmation at this time since 18k and 14k weights have already been calculated separately as described below in gold quantities of 4.8gms or so. - Edge: Bevel, Faceted Setting thickness (tubular and/or pavé beads): Approximately .055 Metal Details: Classic style metal is provided to match setting specifications; classic ring interior details may require further consultation before we are finished with it - if possible. This project is designed around using a ring with 10k-gold or higher (e.g., platinum). A bevel is a good solution here in addition to faceted sides that have 45 degree side edges. A flat inside on all other metals such as stainless, bronze, silver can only occur once.