iVac Pro Blast Gate Mount

iVac Pro Blast Gate Mount

thingiverse

# iVac Pro Blast Gate Mount > A two-piece mounting solution to affix your iVac Pro Blast Gate to the wall ## Requirements: - Mounting bracket (STL included) - Mounting lower foot (STL included) - (2) 1 1/2" or longer construction screws or drywall anchors to affix mount to wall - (3) M6 x 25mm screws (M4 and M5 will also work; longer than 25mm is okay) - (3) M6 washers - (3) M6 nuts ## Usage: - Print the mounting bracket and mounting lower foot. I printed mine in PETG, but PET is fine too. - Using 2 screws, mount the upper bracket to the wall as shown in the picture. Screwing into a stud is best, but drywall anchors will also work. - Using an M6 screw, washer, and nut, attach the mounting foot to the Blast Gate at the corner closest to the power supply port. - Using the remaining sets of hardware, attach the end of the blast gate with the lettering to the mount. - Attach your hoses, the power adapter, and GET SUCKING

Download Model from thingiverse

With this file you will be able to print iVac Pro Blast Gate Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on iVac Pro Blast Gate Mount.