IV Pole Hitch for Wagons and Powerwheels

prusaprinters

<p>This is a hitch for attaching IV poles behind wagons and power-wheels. It makes getting kids out of their hospital rooms easier and reduces risk of tip overs by locking the iv pole in a vertical position relative to the wagon/car.</p><p>THIS DEVICE COMES WITH NO SAFETY RATING. TEST AND APPROVE IN YOUR OWN HOSPITAL or if you're just at home, use at your own risk.</p><p>Good layer adhesion is critical for the larger parts as the load is in the z axis. print at a higher temp, use extra perimeters or anneal parts as needed a well printed part should be able to survive cantilever loads in excess of 1000 foot-pounds for reliable use.</p><p>Designed for iv poles with a 1 inch diameter main pipe.</p><p>Use a ~1/8 inch diameter nail, rounded off, for the pin and either one ¼-20x2.5" bolt or two ¼-20x1" bolt for the hinge.</p>