IUninker Pi Case Din Rail Mount

thingiverse

Raspberry Pi Din Rail Mount for the iUniker Pi Case for 3B+ This mount was specifically designed for a PI being used in an industrial setting where reliability and efficiency are paramount. The cooling on this case is superior. The mount consists of six parts: one wide Din Mount, one narrow Din Mount, two narrow Pi Mounts, and two wide Pi Mounts. There are two different widths of standoffs to ensure proper fitment. Longer screws will be necessary to pass through the standoffs into the case. The standoffs are then screwed onto the Din rail pieces. Note that the parts fit tightly together and may require some sanding with 2000-grit sandpaper to achieve a precise fit. It's essential to pay attention to the widths, as the one closest to the Micro-SD card slot is thicker, and so are the corresponding standoffs. To acquire the necessary components, visit the following links: * Raspberry Pi 3B+: https://www.microcenter.com/product/505661/raspberry-pi-3-model-b * iUniker Case: https://www.amazon.com/dp/B07T3Z4RH4/ref=cm_sw_em_r_mt_dp_U_9IrcEbH890PRY * Longer Screws for standoffs into case: https://www.mcmaster.com/91292a835 * Screws to mount stand off to Din rail mounts: https://www.mcmaster.com/95893a212 All parts were printed with 30% infill. For optimal results, it is recommended to print with PETG; however, PLA should also work.