ITEM light T-Nut M5

prusaprinters

ITEM T-Nut M5 ( Nut 8 ) This T-Nut M5 for ITEM light profiles was designed for a DIY laser cutter project. The T-Nut is accurately designed, so that it fits well into the groove, but does not slide down like other T-nuts. So the stone stays in position and it can easily side parts etc. are mounted. (+) very precise and form-fitting (+) No twisting or tilting (+) high stability if the infill is increased accordingly (+) T-nuts do not fall down even in a vertical position (-) fits only ITEM light profiles, otherwise all positive points will get worse alternative T-nuts: --> M4 T-Nut: https://www.thingiverse.com/thing:2770009 --> M3 T-Nut: https://www.thingiverse.com/thing:2773072 Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 mm Infill: min 15% Notes: The T-Nut was printed in a resolution of 0.2mm to ensure the accuracy of the 8mm groove. The infill was set to 15%, which has given a good stability, but can be increased as needed to get a higher stability. Category: Parts