Iron Throne Flat Brick Base

prusaprinters

<p>Originally taken from <a href="https://www.thingiverse.com/thing:2134970">https://www.thingiverse.com/thing:2134970</a></p> <p>I liked the model overall, but did not like the uneven base since it caused problems sticking to the bed. I didn't like his recommendation to move the nozzle closer as I don't want to damage the PEI sheet.</p> <p>Although you will still have to move the z offset to be close, this version will be less problematic. The originally uneven base was rocky too! Plus, do you really care what the bottom looks like? "Man, I really like looking at the bottom of my sculpture. That's the coolest part!"</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK2S</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.1 mm layer heights</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>10%</p></div> <p><strong>Notes:</strong></p> <p>I used 10% infill to save time and material since it is a larger print and it was enough to support bridges.</p> <p>I recommend 0.1 mm layer heights. Any higher and you lose a lot of detail. Any lower, and it gets messy, risks jamming, and other random problems along with taking two days to print at around 0.05 mm layer heights.</p> </p></p></p> Category: Sculptures