iPhone XS Max and Apple Watch Charging Stand

thingiverse

I updated the original design to suit my unique needs:\r\n\r\n1) I moved the wireless charging pad higher so that it would trigger the iPhone XS Max properly since it's taller than a normal iPhone and wouldn't trigger on the original design.\r\n\r\n2) I adjusted the hole for the Apple Watch charger slightly downward. On the original version, the charger was positioned just high enough that the watch rested elevated off the platform, causing it to slide down and pop off the charger when trying to push the buttons to snooze or cancel an alarm. I've made it sit flush on the platform (I've optimized for a 42mm Series 0/1/2/3), so if you have a 38mm or one of the Series 4, it might not be perfect for your setup.\r\n\r\n3) I redesigned the bottom portion. Instead of having a base, stand, and ring in between, I created a ring on the stand that interfaces with the ring on the base. The ring on the stand is a snug fit. On my print, this means I can assemble the two parts without glue, but if your setup has a prominent elephant foot, it might require some trimming to get them to fit together properly. This also means that the entire bottom of the base will be printing with supports, and the surface finish underneath won't be great. Since you can't see this part when assembled anyway, it's not an issue, but if you're struggling with supports on your printer, this may cause problems for the layers above them. I use Simplify3D, which is fantastic at generating supports, but free options like Cura and Slic3r require some tweaking to get right. Your mileage may vary.\r\n\r\nI reused the same wireless charger as the original design because it looks great and was already designed to fit perfectly. You can find it here: https://www.amazon.com/gp/product/B01GFL6MZE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1\r\n\r\nI hope this updated design is helpful for someone. Enjoy!