iPhone 6 Dock MSI Style

thingiverse

This is a custom iPhone Dock in MSI Style that I've built using red 6mm LEDs for lighting. Unfortunately, I don't have a photo of the installation process, but I'll upload an AutoCAD image to help explain it. First, I removed the insulation from the cable and measured out which wires were powered. Then I added an extra wire by soldering it on and gluing the connector in place once everything was dry. Next, I soldered two 50Ohm resistors - one for each pair of LEDs connected in series - and linked all the LEDs together (check out the attached wiring diagram). Finally, I glued the bottom piece onto the main part and that's it! Optional: I drilled two 3mm holes in the bottom to screw the bottom piece into place.