iPhone 6 / 7 Plus with Apple Watch Stand

thingiverse

This is a unified stand for iPhone 6, 6s, and 7 Plus that also accommodates the Apple Watch charging puck to display your watch in Landscape Mode, making it compatible with Night Stand display. I created it so the headphone jack on the 6 plus remains accessible when the phone is on the stand. It frustrated me that none of the existing stands allowed me to plug my headphones in while in bed. I've designed the stand to be modular, allowing for easy adaptation to different devices. This is achieved through several methods: The PhoneStandAdapter, which holds the Lightning Connector, is a separate component that plugs into the PhoneWatchHolder. Different adapters can be developed for various devices. The adapter will snugly fit original Apple Lighting cables, but third-party cables may not fit as tightly. The PhoneBracket at the top of the Vertical Stand is also detachable, allowing for different width brackets to be created for different phones. The supplied bracket will accommodate a 6/7 plus with a case. The stand requires an original Apple iPhone Cable and the original Apple Watch Puck (42mm). The Lightning cable is fed into the back of the base through channels provided, then moves up through the Base and Watch Stand before being pushed into the PhoneStandAdapter. The Watch Puck is inserted into the PhoneWatchHolder, then into the PhoneStandBase, and out the back under a channel in the base. To secure the Puck to the Watch Stand, something like Blue Tack can be used. When I have time, I will design a PhoneStandHolder for smaller iPhone 6/7 (non-Plus) models. If you have any other requests, please let me know in the comments. I hope this stands useful to you. Print Settings: Printer: Original Prusa i3 mk2 Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Notes: The only part that requires supports is the PhoneWatchHolder, which should be manually placed inside the circular holder where the watch puck is inserted. It's recommended to print the WatchStandHolder and WatchStandStand at 50% infill for added rigidity. Either PLA or ABS can be used, and both will work equally well. Post-Printing: Assembly To assemble the stand, you'll need the following additional hardware: 2 x M3 10mm Hex Screws and Nuts to attach PhoneStandHolder to PhoneStandStand 2 x M3 12mm Hex Screws and Nuts to attach PhoneStandStand to PhoneStandBase Optionally, you can attach PhoneStandHolder to PhoneStandBase and PhoneStandAdapter to PhoneWatchHolder using glue for PLA or acetone for ABS prints. This should only be done once the cables have been fed through and ensured they fit snugly. Gluing is not required on most prints, as they should hold in place anyway. Design Process This model was designed entirely in Fusion 360. For me, it's easily the best CAM application available, and free for personal use.