iPad stand honeycomb design.

prusaprinters

This is a simple iPad stand.The original design is by @whoisjako . The original work is wonderful design, but the hook is too small and unstable for my old iPad, so I modeled a new one.The original design is at this URL.https://www.printables.com/model/173402-ipad-stand-honeycomb-versionThis would fit the newer iPads with narrow bezels in a square shape after the 10th generation or later. Three kind of models:Three models are available to match the thickness of the iPad.Model thickness 9mm: iPad-stand-60deg-D9-H7-W9_iPad2.stlMoldel thickness 7.8mm: iPad-stand-60deg-D9-H7-W7.8_iPad5-9gen.stlModel thickness 6.4mm: iPad-stand-60deg-D9-H7-W6.4_Air2-5gen.stl iPad Compatibility: The 9mm thickness model is fits the iPad 2 with a thickness of 8.8mm The 7.8mm thickness moldel is fits the iPad 5gen, 6gen, 7gen, 8gen, 9gen, iPadAir, iPad mini2, mini3 with a thickness of 7.5mm The 6.4mm thickness model is fits the iPad Air2, Air 3gen, 4gen, 5gen, iPad mini4, mini 5gen, iPad Pro 9.7inch, 10.5inch with a thickness of 6.1mmAnd the 6.4mm thickness model may or may not fit iPad mini 6gen with t=6.3mm, iPad Pro 12.9inch 5gen, 6gen with t=6.4mm. Print Settings:Material: PLA, PETG. Maybe other materials would be fine.Layer heigth: 0.2mm (We have not tested the height of the other layers.)Supports: no supports Typical amount of filament and printing time:It uses only 20.62 g of filament and can be printed in 2h22m for 0.2mm layer height. Enjoy!