IOS/Android Tablet & Phone Simple Wall Mount (Ipad/Samsung etc)

pinshape

I designed a pair of tablet holders that can be attached to the wall for easy charging or convenient touch screen access on various phone devices. Personally, I use two pairs - one for my iPad Pro and another for my Samsung S3 tablet. The slide is approximately 9.5 mm wide, so if you have a device with a cover, as long as its thickness is less than that, it should still fit easily. This is because even without covers, devices typically have some room to spare. When not in use, I usually feed the charging cord through one of the slots. Print Details: To print this model, position it on the side with the opening facing up and do not use any supports. Supports are not needed. Resolution: The recommended resolution is 0.2-0.3 mm. Infill: Use an infill density of at least 25%. Filament: I used Dikale PLA Black filament for printing this model. Notes: To print a pair, simply adjust the wall attachment accordingly. The hole for the screw is approximately 4 mm in diameter, depending on your print layer accuracy. The opening or slot where tablets and devices slide into is about 9.5 mm wide, and the total overall length of the model is roughly 75 mm.