Invisible Parametric Shelf Attachment System

prusaprinters

<p>This is a proof of concept for a minimally invasive (but rock-stable), modular/parametric system to attach stuff to wood boards.</p> <p>It's using two hidden dowel pins secured with 3mm SPAX wood screws. I'm planning to use this in my campervan, so everything should be removable &amp; tight fit (no rattling or shaking loose, and I want to be able to easily adjust/swap any shelves later on). To this end, the receiving part can be scaled in the Openscad file ("fitting test"). My test prints are PLA on a poorly calibrated printer and x1.07 scaling gave a perfect&amp;solid fit (removal of the example shelf shown requires gentle tapping on the underside with a hammer).</p> <p>The included simple shelf is parametric, and I just might eventually add other stuff. There's also a jig for the shelf (drill hole positions must be very exact or it won't fit). The picture shows a quick test print I made with PLA (ultimately I'll use ASA). Feel free to play around with it.</p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>Biqu B1</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div><strong>Infill:</strong></p> <p>20%</p> <p><strong>Filament:</strong> Fillamentum PLA Purple Red <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Supports will definitely prevent the pins fitting the slots.</p></div></p> </p></p> Category: Household