Interchangeable Cake Stand

prusaprinters

Printed with eSun PLA+ (Black, Yellow, and Fire Engine Red),The Stand:Printed in 3 parts with the base and plate screwing together, and the skirt concealing the decor connectors.Base - printed without supports, .20 mm, 20% infill (supports may be needed depending on your printer - I'm pushing the limits with mine I think)Plate - printed upside-down without supports, .20 mm, 20% infillSkirt - printed upside-down without supports, .20 mm, 15% infillDecor:Buttons: printed in two parts, buttons and posts, without supports, .20 mm, 20% infill (will be glued together)Buttons V2:  2 color print version to better match style of feet (black ‘outline’ on bottom, with yellow button top). Added 4-Oct-2023.Clips: printed on side, no supports, .20 mm, 100% infillCartoon Feet: printed without supports, 20% infill, two versions:Joined: If you will not be using different color filaments, and/or wish to paint with no glue neededSeparated: shoe are printed separately (handy for color change or painting), then glued to backing with legs.Ears: printed brim down, with supports for the ears and dome, .20 mm, 20% infillAdditional Supplies needed:Superglue (or your preferred glue choice for PLA) for the buttons and if using separated feet.File or Sandpaper (if button posts do not print cleanly)Resin (if you want to have a nice smooth/glossy finish or seal it after painting) - ArtResin is Certified FoodSafe  (I mixed in a condiment cup, and brushed on with a disposable sponge brush using about 1/2 condiment cup worth (1 ounce total.. give or take) of 2 part mixed resin to cover feet, buttons and ears.. it doesn't take much!)Other decor sets will eventually be created and added, by myself and hopefully others.  The Stand_Connector file is up for any who wish to make their own decor items.