Inter-Tech 4088 - 240mm AIO Mount (Arctic Liquid Freezer II)

thingiverse

Just a few simple parts, designed to fit an Arctic Liquid Freezer II 240 into an Inter-Tech 4088 (4U) server chassis. **Parts:** _Standoff-Base & Standoff-Clipped-Part_ is used as a base for the radiator so it no longer collides with the mainboard, it reaches into the lower 3.5" Drive-Bay so you can screw it tight to the Drive-Bay frame, when using an ASRock Rack X470D4U it provides enough clearance above the mainboard to install both NVMe SSDs _Holder_ will be used to prevent the radiator from moving (you'll need a Drill a hole into the Printed part if you want to screw it to the case frame) **Recommended Case-Mods:** Install an additional high airflow fan into the 5.25" drive-bays (120mm) using a printed fan mount: (For Example: [this](https://www.thingiverse.com/thing:2936935) Created by [Jimmy01](https://www.thingiverse.com/jimmy01)) **Tools Needed:** Drill & Drill Bits (2-3mm, 5-6mm) **Print Settings:** 3-4 Vertical Perimeters, 20% Infill, I'd recommend PLA or ABS.