Inside and outside sliding latch
prusaprinters
<p>Slide latch that can be operated from the inside and outside.<br>Slide and closing arch, including spacer shims<br>Internal arch ribbing for smooth sliding movement.<br>Print the parts.<br>Slide the slide into the base until the threaded hole is visible at the slide hole.<br>Insert the slide pin into the hole and tighten the pin.<br>Attach the sliding latch to the door and insert the lock arch</p><p>For doors that are narrower than 3 cm, use the SlidingPinShort and normal doors the SlidingPinLong.<br>The corresponding ClosingArch can be used with normal doors and straight frames.</p><p>I made the sliding latch for a junk room with a crooked door and frame that do not close properly, for that I needed a wider closing arch (ClosingArchBig) so that the door can still be closed easily with the latch.</p><p>If necessary, I have made suitable filler plates for all parts.</p><p> </p><p>For outside use PETG or ASA or ABS filament.<br>Indoors, PLA is sufficient.<br>Layer thickness 0.20 mm<br>Filling 20%, SlidingPin 100%<br>Everything can be printed without support.</p>
With this file you will be able to print Inside and outside sliding latch with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Inside and outside sliding latch.