
Insert for Rurik board game plus expansion - player building trays
thingiverse
### Extension to the insert here: https://www.thingiverse.com/thing:4961416 ### Info: This adds a building tray per player to fit all buildings from the base game and expansion. I've left room in the bottom right corner for use during play. Use this space for whatever makes sense during your game. The building trays sit on top of the existing player trays. The lips add about 1mm of height to the ensamble. Based on a comment from the original insert developer about the resource trays being too tall and narrow, I've remixed them and cut them in half (but ever so slightly taller). This allows each side of the table to have a resource tray, and keeps the stacked resource trays about level with the added height to the player trays. ### Print: 4 x Rurik_player_building_trays v2 4 x Rurik Player Tray - smaller 2 x Rurik_Resource_trays_1_of_2 slightly half-size (optional) 2 x Rurik_Resource_trays_2_of_2 slightly half-size (optional) ##### Important Note: I've yet to have this printed and tested. I'll report in the comments once I've got a printed piece, and will update the design as necessary. ##### Changelog: Rev1: Original upload Rev2: Replaced the slightly taller resource trays with half-sized trays. Print two of each, divide the resources, and have resources for both sides of the table. Rev3: Updated the building tray with a v2 version after receiving some feedback. * The wells for Taverns and Markets are a bit smaller, as the pieces were reportedly loose. * The well for the Stables is larger, as that one was tight. * The overall height of the tray is now 15mm to ensure that the taller Stronghold fits. * The lip is also larger at 2mm, to make it less flimsy. * Added a shorter version of the player trays (for the rest of the pieces), in order to make up for the increased lip height of the building tray. It now comes with holes to make grabbing the building tray easier.
With this file you will be able to print Insert for Rurik board game plus expansion - player building trays with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Insert for Rurik board game plus expansion - player building trays.