Infill Coasters

prusaprinters

<p>Simple coasters designed right within PrusaSlicer. &nbsp;Drop in any shape and size it to whatever you'd like. &nbsp;Standard coaster sizes (according to the internet) is anywhere where from 89mm or 3.5" to 102mm or 4".</p><p>I designed my coasters with a 0.2mm layer height, 4 walls, 4 top &amp; bottom layers and the infill of your choice set at 10% density. &nbsp;With a color change at 1mm and 2.4mm. &nbsp;This gives you a 3mm coaster with lots of room to show off the infill. &nbsp;I also made one at 6mm for a thicker coaster as well. &nbsp;Please note I increased the width of the infill file from the standard 0.45mm to 0.48mm to give a beefier infill line. &nbsp;Also make sure to check the seems to aligned or rear so they all line up nicely. &nbsp;I put a snapshot of all on my settings with the photos.</p><p>The beauty of this coaster is its super simple to configure if you want to change the size. &nbsp;You can play with the speeds as well to print them quickly.</p><p>On my Prusa Mini the 3mm coaster take about 45min and uses about 15g of filament total and the 6mm coasters take about 1hrs and uses about 20g of filament total.</p><p>Enjoy</p>