Indra - SV (Snakevariant)

thingiverse

This is the SV edition of the Indra by Captainslug. K26 spring ready with a 550mm Barrel. Inspired by the Snooper and AWP insert, I set out to create my own variant. Personally I use the flat face Plunger from here. https://www.thingiverse.com/thing:5197978 Update: 04.Nov.2022 ----------------------------------------------------------------------* i11_Core updated again, increased diameter to compensate for further side movement of the pusher rod with larger O-Rings so those don't rub off the rod. Update: 25.Oct.2022 ----------------------------------------------------------------------* i11_Core updated for better tolerance with bigger pusher O-rings. Barm_center increased angle for better clearance when pulling. Update: 24.Oct.2022 ----------------------------------------------------------------------* ***TOPGUARD_front, Topguard_rear and Bandle are back in. The Bandle is extended to allow the plungertube a better seat. (Optional file - you can still use the original one if that works for you). I want to eliminate (reduce) the side movement of the pusher when priming the blaster. The K26 causes alot of flex and hence the plungertube has to catch all that force from the pusher with the Bandle pulled sideways -eventually slipping off - or when glued cracking at some point due to fartigue . The original Design moved the pivot point upwards instead of sideways but still it will cause a latheral force all the same. With the topguard over the plungertube it just makes it more visible. The Bandle is keept straight (and so the pusher) when the plungertube is fixed properly to the bandle (Most glue it). In turn the plungertube is guided by the DCHEEK. -----------------------------------------------------------------------* It still utilizes 30% of the original parts. Mainly the core parts. I edited the ram and plunger, sear parts for better tolerance, but you may still use your original parts. You can still use a String catch! I personally use the spring version and edited that part for better attachment to the rear stock. For hardware you still have to use the threaded rods for the handguard, M3 bolts for the picatinny rails and 4mm holes for M3 heat inserts pressed into the parts.