Inateck FD2002 docking station drive/dust cover

prusaprinters

<p>Dust/drive cover for the Inateck FD2002 docking station, fitting 2x3.5in drives.</p> <p>Will fit other docking stations having a slot-to-slot distance of 41mm (+/-0.5mm tolerated), drive protrusion of 10-11cm (some models from sharkoon seem similar enough).</p> <p>The cover is convection cooled. HDD temperature increases by ~1.5C compared to open-air during operation. Internal fins slide over and stabilize the drives. The top cap is printed separately and is clip-on.</p> <h3>Printing tips</h3> <p>Optimized for a 0.4 nozzle, 0.2 layer height.</p> <p>Print upside-down, as given. No supports required.</p> <p>Use PLA if inexperienced. The main body may warp due to chimney effect with other materials. If that happens:</p> <ul> <li>print enclosed if possible</li> <li>lower bed temperature or turn it off completely (substitute with gluestick)</li> <li>reduce print speed above 30mm in height</li> </ul> Category: Computer