Improved TS-100 case with Zipper

thingiverse

Improved version of my earlier model. Holding two additional tips instead of one, with clips that swap out the TS100 into the bottom of the case since the originals broke last month. I removed the silly TS-100 text as well. To make it, you'll need a 40cm long zipper, preferably coarse (5-6mm track width). The rest is just stitching the zipper to the case with holes and a groove for the thread to go in. By putting in the zipper carefully, you can easily take the two halves apart by fully opening it. I redid all the files with a newer version of Icesl so there are no resolution limits anymore on the stl files. However, I still recommend plain 0.2mm resolution for the print. A warning: Superglueing the zipper will turn the cloth parts hard and the glue will soak into the cloth, thus affecting a large part of it. This will prevent the zipper from working properly.