Improved trigger for mini Crossbow
thingiverse
This revised trigger optimizes the performance of the mini Crossbow on Thingiverse as http://www.thingiverse.com/thing:509659 suggests. It is recommended that you use a small drill to thoroughly clean out the trigger hole so that a piece of 1.75mm PLA can easily pass through. Next, heat one end of the PLA until it becomes malleable, forming a head that closely resembles a rivet. Push the other end of the PLA through the Crossbow, followed by the trigger, and then finally out the opposite side. Cut the remaining piece of PLA so that only 1/8" to 3/16" sticks through the opposing side. Carefully heat this end once again until it reaches a malleable state, allowing you to form another rivet-like shape.
With this file you will be able to print Improved trigger for mini Crossbow with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Improved trigger for mini Crossbow.