improved LED Diffuser for High Resolution 1701-D Warpcore

thingiverse

This is a "improved" version of the LED diffuser for the "High Resolution 1701-D Warpcore" In the original design from Novel_Mutations the diffuser the light output has regular vertical lines. i wanted to reduce those vertical lines. For comparison see the picture with the green light. There you see the original design on the top, below the improved version (and on the bottom is a prototype - ignore this one;-) ) . What i also wanted to try is adding a separator between each led to reduce crosstalk. so for a normal Constrictor Module you need to print: * 5x Diffuser_test_v4_11mm.stl * 4x Diffuser_Separator.stl for the Reaction Chamber you need: * 3x Diffuser_test_v4_11mm.stl * 2x Diffuser_Separator.stl * 2x Diffuser_next_Separator_reaction_core_14,2mm.stl for each "Phase Adjustment Coil you need: * 1x Diffuser_big_separator 10mm.stl for the bottom you need: * 1x Spacer 8mm.stl I added some parts with different heights in case you need something different. It may fit your needs. To get the LED spacing right i added a jigg to help solder the WS2812 LED modules. I also modified the Firmware from Novel_Mutations, utilizing a ESP8266, to support Wifi. You can find the Sourcecode over on GitHub: https://github.com/BrainHunter/WarpCore See my complete make of the WarpCore here: https://www.thingiverse.com/make:972192