
Improved Hinged Voron V0.1 Top-hat with LED holders
prusaprinters
<p>UPDATE: LED strip holder redesign - 2022/03/22</p><p>UPDATE to HINGES.stl file just posted. 2022/03/18</p><p>-----------</p><h3>This project requires the original Voron V0.1 top-hat design.</h3><p>-------------</p><p>Great work by <strong>93djen</strong>, but I had some fit issues and wanted more from the design.</p><p>The main changes are:</p><ul><li>hole placements seemed to be just a bit off for my one piece top-hat, so that was compared to the original Voron V0.1 CAD files</li><li>locating pegs that extend down into the frame (as per the original top-hat)</li><li>LED ramps on the side that were extended in length to better accommodate 30 LED/m strips</li><li>slight move on the hinge pivot point holes as they seemed VERY tight and needed to be filed oval to fully close with the original design</li><li>redesign of segment joints to better match the lip/contour and provide larger glue surface for acetone welding. (<i>yes, I screwed and glued this baby together</i>!)</li><li>Added cable tie holes to the original top-hat front corners, for LED power routing.</li><li>Designed for M3 brass heated inserts</li></ul><p> </p><p>I just glued the LED carriers to the frame as I trust acetone solvent welding more than cheap adhesive backing at temperatures over 30 C.</p><p>STEP files provided for anyone that wants to make changes.</p><p> </p><p>Have fun.</p><p>Remember, #dontbeahonda</p><p> </p><p> </p>
With this file you will be able to print Improved Hinged Voron V0.1 Top-hat with LED holders with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Improved Hinged Voron V0.1 Top-hat with LED holders.