Improved Ender 3 Manual Bed Levelling Procedure

thingiverse

This is a revised version of [Ender-3 Bed-leveling procedure](https://www.thingiverse.com/thing:2874536) streamlined and significantly faster. **To utilize it:** 1. Duplicate the gcode file to your Ender 3 or Ender 3 Pro (disregard the .stl file) 2. Rotate each of the bed lowering knobs in the "down" direction for a turn 3. On your printer, select the "Bedlevel_Ender_3-fast.gcode" file from the SD card and start to "print" it 4. The print head will move to just over the front left levelling knob. Wriggle a piece of paper between the extruder nozzle and the bed then turn the levelling knob in the "up" direction until you can feel it just starting to grip the paper 5. Press the button on the printer to resume the print and it'll move to the back left, repeat the paper wiggling until you're satisfied then press resume again. 6. Continue doing this until you've gone to each corner twice then you are finished. **The modifications made to the original Thing:** * All of the X/Y moves are much faster * The Z axis lift is only 5mm above the bed height * There is no pre-heating of the bed or nozzle * Nothing is printed at the end of the levelling